You’re standing in front of your control panel. Temperature readings jump around. The readings don’t match what you expect. Is your thermocouple type causing the problem? Grounded types respond faster. But they can pick up electrical noise. Ungrounded types resist interference. But they react slower to temperature changes. You need to know how each one

You have a critical temperature to watch. Your problem is that the control room needs the reading, and so does the local display on the factory floor. You only have one thermocouple for the job. So, you’re wondering, can you split a thermocouple signal? You absolutely can, but not in the way you might think.

Are you struggling to fit a standard temperature probe into a tight spot? You need accurate data, but you’re worried that forcing the equipment will damage it or give you bad readings. Yes, you can bend a thermocouple probe, but there’s a big catch: it must be a mineral-insulated (MI) type. If you try to