- اتبع الولايات المتحدة
JC090 Remote type Pipe Magnetic Flow meter
JC090 Remote type Pipe Magnetic Flow meter is a kind of inductional instrument designed by Faraday’s law of electromagnetic induction to measure flow of conductive media in the tube. It adopts the technology of insertion of single chip to realize digital excitation and employs CAN local fieldbus.
- مقدمة
- المعلمات
- الطراز
- ورشة عمل
- كيفية الطلب
- التركيب
- التعبئة
JC090 Remote type Pipe Magnetic Flowmeter
An electromagnetic flowmeter is a kind of inductional instrument designed by Faraday’s law of electromagnetic induction to measure the flow of conductive media in the tube. It adopts the technology of insertion of a single chip to realize digital excitation and employs CAN local Fieldbus.
The electromagnetic flowmeter can realize local indication and output electrical current signal of 4-20mA which can be used to record, adjust and control. Electromagnetic flow meters are widely used in industrial sectors such as the chemical industry, environmental protection, metallurgy, pharmaceutical, paper making, water supply, and removal, etc.
Besides measuring the flow of general conductive liquid electromagnetic flowmeter can measure the flow of liquid-solid mixed fluid, high-viscosity fluid and salt, strong acid, and strong alkali.
Smart electromagnetic flow meters consist of sensors and smart signal transducers. And it can be classified into two structures— integral type and remote type according to the set-up form of the sensor and transducer. In terms of integral type electromagnetic flow meters, transducer and sensor directly assemble as a whole and can not be dissociated. It is usually used at the scene where the environmental situation is good. To remote type electromagnetic flow meters transducer composes a product through a special electric cable and sensor. The sensor is installed at the scene and the transducer is installed in the place where the conditions are good. It is usually used at the scene where the environmental situation is poor, such as underground wells, high temperatures,s and the place where people can not reach.
Technical Parameter for JC090 Remote type Pipe Magnetic Flowmeter
| القطر المناسب | DN10 ~ DN2600 (أقل من DN25 غير قياسي، والذي يجب تخصيصه) |
| مواد الأقطاب الكهربائية | 316L (فولاذ مقاوم للصدأ)، هاستيلوي C، هاستيلوي B، تيتانيوم، تانتالوم |
| سائل مناسب | Liquid with a conductive ratio of more than 5 μs/cm |
| نطاق القياس | 0.1 ~ 10 م/ث (قابلة للتمديد إلى 15 م/ث) |
| الحد الأعلى للامتداد | 0.5 ~ 10 م/ث. 1 ~ 5 م/ث موصى به |
| الدقة | 0.3%, 0.5%,1.0% |
| إشارات الإخراج | 4~20mADC, load<= 750ohm, 0~3kHz, 5V with source and changeable width.
high terminal and effective frequency output , RS485 interface |
| عملية الضغط | 1.0 ميجا باسكال، 1.6 ميجا باسكال، 4.0 ميجا باسكال، 16 ميجا باسكال (خاص) |
| درجة حرارة السوائل | -20C~80C, 80C~130C,130C~180C Depending on Lining Material |
| درجة الحرارة المحيطة | المستشعر -40 درجة مئوية ~ 80 درجة مئوية. محول الطاقة -15 درجة مئوية ~ 50 درجة مئوية |
| الرطوبة المحيطة | <= 85%RH 85%RH (عند 20 درجة مئوية) |
| حجم مخرج الكابل | M20(16) ×1.5,1/2”NPT |
| مزود الطاقة | 220 فولت تيار متردد ±10%، 50 هرتز ± 1 هرتز، 24 فولت تيار مستمر ±10% |
| استهلاك الطاقة | <=8W |
| تصنيفات الحماية | النوع المتكامل: النوع البعيد: مستشعر IP68، محول طاقة IP65 |
| مواد البطانة | PTFE، والمطاط اللين، والمطاط الصلب، و PFA، إلخ |
| اتصال العملية | Flange:ANSI, DIN, JIS,ISO, GB standard
Thread :NPT ,BSP ,G Tri-clamp connection |
| مواد التأريض | 316L (فولاذ مقاوم للصدأ)، HC، Ti، Ti، Ta، Cu |
| مواد الإسكان | الفولاذ الكربوني، 304SS، 316SS |
Model Selection for JC090 Remote type Pipe Magnetic Flowmeter
| الكود | القطر الاسمي (مم) |
نطاق التدفق (m3/h) |
الكود | القطر الاسمي (مم) | نطاق التدفق (m3/h) |
| JC-090-10 JC-090-15 JC-090-20 JC-090-25 JC-090-32 JC-090-40 JC-090-50 JC-090-65 JC-090-80 JC-090-100 JC-090-125 JC-090-150 JC-090-200 JC-090-250 JC-090-300 JC-090-350 JC-090-400 |
Dn10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 DN350 DN400 |
0.085-2.8 0.19~6.36 0.34~11.3 0.53~17.66 0.87~28.94 1.36~45.22 2.12~70.65 3.58~119.40 5.43~180.86 8.48~282.6 13.25~441.56 19.08~635.85 33.91~1130.40 52.99~1766.25 76.30~2543.40 103.86~3461.85 135.65~4521.60 |
JC-090-450 JC-090-500 JC-090-600 JC-090-700 JC-090-800 JC-090-900 JC-090-1000 JC-090-1200 JC-090-1400 JC-090-1600 JC-090-1800 JC-090-2000 JC-090-2200 JC-090-2400 JC-090-2600 |
DN-450 DN-500 DN-600 DN-700 DN-800 DN-900 DN-1000 DN-1200 DN-1400 DN-1600 DN-1800 DN-2000 DN-2200 DN-2400 DN-2600 |
171.00~5722.65 211.95~7065.00 305.21~10173.00 415.42~13847.40 542.59~18086.40 686.72~22890.60 847.80~28260.00 1220.83~40694.40 1661.69~55389.60 2170.37~72345.60 2746.87.00~91562.40 3391.20~113040.00 4103.35~136778.40 4883.33~162777.60 5731.13~191037.60 |
| الكود | مادة القطب الكهربائي |
| K1 K2 K3 K4 K5 K6 K7 |
SS 316L هاستيلوي ب هاستيلوي C تيتانيوم التنتالوم سبيكة Pt/إيريديوم طلاء الفولاذ المقاوم للصدأ كربيد التنجستن |
| الكود | مادة البطانة | |
| C1 C2 C3 C4 C5 C6 C7 |
PTFE (F4 أو تفلون) بروبيلين الإيثيلين المفلور (FEP) واو صندوق بريد (مطاط ناعم) مطاط البولي يوريثين (PUR) المطاط الصلب الاتحاد الفلسطيني لكرة القدم |
| الكود | الوظيفة |
|
E1 F3 |
الفئة 0.3% الفئة 0.5% الفئة 1.0% 4 ~ 20mADC، الحمل ≤750Ω 0 ~ 3 كيلو هرتز، 5 فولت نشط، نبض قابل للتغيير، خرج تردد عالي وفعال واجهة RS 485 (مودبوس) هارت درجة الحرارة العادية درجة حرارة عالية درجة الحرارة الفائقة 1.0 ميجا باسكال 1.6 ميجا باسكال 4.0 ميجا باسكال 16 ميجا باسكال الضغط الخاص 220 فولت تيار متردد+110%؛ 50 هرتز+1 هرتز 24VDC+10%+10% تعمل بالبطارية النوع المتكامل نوع جهاز التحكم عن بُعد مقاوم للانفجار، متكامل وصلة شفة (قياسية: ANSI، JIS، DIN، GB) وصلة اللولب (NPT، BSP، G) وصلة صحية ثلاثية المشبك ثلاثية المشبك |
كيفية الطلب
1.متوسط
2- حجم الأنبوب
3- معدل التدفق (الحد الأدنى/العادي/الحد الأقصى)
4- درجة حرارة العمل
5- ضغط العمل
6- عملية التوصيل
7- مزود الطاقة
8- المتطلبات الخاصة الأخرى
مقياس التدفق الكهرومغناطيسي
BCST electromagnetic flowmeters are volumetric inflow measures that don’t have any moving corridor to wear, reducing the need for conservation or relief. Instead, it’s used for determining the fluid inflow through the voltage, and the flowing liquid induces it with the help of a glamorous field.
- Rapid-fire response to inflow changes.
- Wide direct range.
- We optimized the measuring range setting.
- Can measure rear inflow.
- No fresh pressure drops.
- No inhibition is created to inflow.
- It’s substantially suitable for solid hydraulic transport.
- It’s innocent of changes in temperature, viscosity, density, concentration, and electrical conductivity.
BCST offers a wide range of electromagnetic flowmeters in the market.
These are:
- Compact Type Electromagnetic Flowmeter
This is the most common type of pipe inline flowmeter, its size range from DN 10 to DN2600
- Sanitary Electromagnetic Flowmeter
This flowmeter is substantially for the food, beverage, and pharmaceutical assiduity.
- Thread Connection Electromagnetic Flowmeter
This flowmeter has NTP, G, BSP thread as voluntary.
- Battery Electromagnetic Flowmeter
This battery flange flowmeter is suitable for the place without power force. The battery is specially designed with long life.
- Battery Inserted Electromagnetic Flowmeter
This is inserted into the pipe by the battery power force. It’s IP 68 protection degree.
- Inserted Electromagnetic Flowmeter
This is suitable for big size pipes. It features simple installation and long working life.
- Insertion Electromagnetic Flowmeter with Pressure Sensor
This flowmeter is a BCST patent product. It can measure the inflow rate and pressure value by one flowmeter.
- Remote Electromagnetic Flowmeter
This flowmeter is accessible to remote display and read.
- Battery Electromagnetic Flowmeter with Pressure Sensor
This is a flanged installed flowmeter with a built-in pressure detector.
- Remote Electromagnetic Flowmeter
This is for remote display flange connection flowmeter. Its protection degree has IP 65, IP 67, and IP 68.
- Cement Slurry Scraper Electromagnetic Flowmeter
This flowmeter is for liquid with particulates; it’s easy to clean.
- High-Pressure Flange Electromagnetic Flowmeter
This is for a high-pressure channel. The maximum pressure standing is 25MPA.
- Stainless Steel Electromagnetic Flowmeter
This flowmeter is for corrosive operation.
BCST also offers advantage electromagnetic flowmeter options.
These are:
- Battery Type Electromagnetic Flowmeter with Pressure Sensor
- IP68 Battery Electromagnetic Flowmeter
- PTFE Liner Electromagnetic Flowmeter
- Remote Electromagnetic Flowmeter
Electromagnetic flowmeter plays an important part in water, water treatment shops, paper making, sugar factories, oil & gas, and chemical power assiduity. It isn’t affected and disturbed by the heavy overflows, and indeed the loss of pressure isn’t possible. It can also handle low floods and can fluently handle heavy downpours like mud and sewage. Moreover, it doesn’t depend on external factors, including pressure, viscosity, or temperature.
With over 20 years of manufacturing experience, Germany imported estimation system, long-time tracking, fast delivery time, professional specialized support platoon, CE, SIL2, RoHs instruments, BCST electromagnetic flowmeter is a commanding choice to deliver perfection and performance your operations demand.
BCST electromagnetic flowmeters are installed worldwide in a variety of diligence.
Still, you can email us at info@bcstgroup, If you have any queries about our electromagneticflowmeter.com.
English 
Arabic 
Russian 
French 
Spanish