- اتبع الولايات المتحدة
جهاز قياس تدفق الغاز التوربيني JCWQ
JCWQ series gas turbine flowmeter is widely used for measurement of natural gas, coal gas, liquefied gas and light hydrocarbon gas, etc.
- مدة السعر: فوب/سيف/إكسو/إكسو/دباغ
- الحزمة: حقيبة خشبية مصدرة أو حسب طلب العميل
- وقت التسليم:: من 7 إلى 10 أيام عمل
- وسائل النقل: عن طريق البحر، عن طريق الجو، عن طريق البريد السريع
- ميناء الشحن: ميناء شنغهاي
- أصل المكان: جيانغسو
- الضمان: 12 شهرًا
- مقدمة
- الميزة
- المعلمات
- الطراز
- كيفية الطلب
- التطبيق
جهاز قياس تدفق الغاز التوربيني JCWQ
JCWQ series gas turbine flowmeter is widely used for the measurement of natural gas, coal gas, liquefied gas, and light hydrocarbon gas, etc.
Turbine gas flow meters are an ideal instrument to measure gas flow, especially for the clean, low viscosity gas fluid. JCWQ gas turbine flowmeter can measure volumetric flow when fluid flowing past a rotor without spinning. It can also measure mass flow if the gas density is set. JCWQ turbine gas flowmeters are a favorite device for trading settlement.
- A dedicated instrument for gas measurement
- A dedicated instrument for oil & gas recycle system
- High accuracy: ±1.5%, ±1.0% or ±0.75%
- Good repetitiveness
- Test temperature, pressure, and flow of measured gas; automatic tracking and compensation of flow; an indication of gas total volume under standard status; real-time query of temperature, pressure, time and date, etc.
- Built-in pressure & temperature sensor, high safety performance, compact structure & beautiful outlook
- Low power consumption, more than 3 years service life for one 3V 10AH lithium cell
- Instrument factor, total flow value kept for 10 years after power off
Technical Parameter for JCWQ Turbine Gas Flow Meter
| DN (mm) & Connection | 25, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300 flange connection
25, 40 thread connection |
| الدقة | ±1.5%, ±1.0% or ±0.75% (need special order) |
| Turndown | 1:10; 1:20; 1:30 |
| Instrument Material | Body: 304 SS; impeller: anti-corrosive ABS or high-quality aluminum alloy; indicator: cast aluminum |
| Medium Temperature (℃) | -30 ℃ ~ +80 ℃ |
| Ambient Conditions | Temperature: -20℃~+60℃, relative humidity 5% ~ 90%, atmospheric pressure 86 ~ 106 KPa |
| إشارة الإخراج | Sensor: pulse frequency signal, low level less than 0.8V, high level more than 8V
Transmitter: two wire 4-20mA DC current signal |
| مزود الطاقة | Sensor: +12V DC, +24V DC (optional)
Transmitter: +24V DC Local indication type: built-in 3V lithium cell |
| Signal Transmission Line | STVPV3×0.3 (3 wire), 2×0.3 (2 wire) |
| Transmission Distance | No more than 1000 m |
| Signal Line Interface | M20×1.5（F） |
| Explosion Proof | ExdIIBT6 |
| Enclosure Protection | IP65 |
Measuring Range & Working Pressure
| DN (مم) | الطراز | Standard Span
(m3/h) |
Extension Span (m3/h) | Pressure (MPa) | التركيب | ||
| DN25 | JCWQ-25— | —— | W3 | 0.5-4 | 4.0 | Flange (thread) | |
| —— | W4 | 0.7-7 | 4.0 | ||||
| ——- | W5 | 1.5-15 | 4.0 | ||||
| S1 | 3-30 | W1 | 1.5-30 | 4.0 | |||
| S2 | 4-40 | W2 | 2-40 | 4.0 | |||
| DN40 | JCWQ-40— | S1 | 5-50 | W1 | 2.5-50 | 4.0 | Flange (thread) |
| S2 | 8-80 | W2 | 4-80 | 4.0 | |||
| DN50 | JCWQ-50— | S1 | 10-100 | W1 | 5-100 | 4.0 | Flange |
| S2 | 15-150 | W2 | 8-150 | 4.0 | Flange | ||
| DN65 | JCWQ-65— | S | 15-200 | W | 10-200 | 1.6 | Flange |
| DN80 | JCWQ-80— | S | 15-300 | W1 | 10-300 | 1.6 | Flange |
| W2 | 15-350 | 1.6 | Flange | ||||
| DN100 | JCWQ-100— | S | 20-400 | W1 | 15-400 | 1.6 | Flange |
| W2 | 20-500 | 1.6 | Flange | ||||
| DN125 | JCWQ-125— | S | 20-800 | W1 | 18-800 | 1.6 | Flange |
| W2 | 20-900 | 1.6 | Flange | ||||
| DN150 | JCWQ-150— | S | 50-1000 | W1 | 25-1000 | 1.6 | Flange |
| W2 | 50-1200 | 1.6 | Flange | ||||
| DN200 | JCWQ-200— | S | 150-2000 | W | 80-2500 | 1.6 | Flange |
| DN250 | JCWQ-250— | S | 200-3000 | W | 150-3500 | 1.6 | Flange |
| DN300 | JCWQ-300— | S | 250-4000 | W | 200-4000 | 1.6 | Flange |
Note 1: In table 2, “standard span” refers to general measuring range (applicable for JCWQ-N/A/B/C/D)
Note 2: In table 2. “extension span” only for “smart integral gas turbine flowmeter” or “smart integral gas flowmeter with temperature & pressure compensation (JCWQ-B/C/D)
Model Selection for JCWQ Turbine Gas Flow Meter
| الطراز | الملاحظات | ||||||
| JCWQ | |||||||
|
النوع |
N | Sensor type: +12V or 24V, output 3 wire pulse signal | |||||
| A | Transmitter type: +24V, output 2 wire 4-20 mA | ||||||
| B | Smart type: lithium cell, local indication without output | ||||||
| C | Smart type: +24V, local indication, output two wire 4-20mA | ||||||
| D | Smart type: T & P compensation integrated, local indication
with remote signal |
||||||
|
دن |
25 | DN 25 mm | |||||
| 40 | DN 40 mm | ||||||
| 50 | DN 50 mm | ||||||
| 65 | DN 65 mm | ||||||
| 80 | DN 80 mm | ||||||
| 100 | DN 100 mm | ||||||
| 125 | DN 125 mm | ||||||
| 150 | DN 150 mm | ||||||
| 200 | DN 200 mm | ||||||
| 250 | DN 250 mm | ||||||
| 300 | DN 300 mm | ||||||
| النطاق | W (x) | Extension range, see table 2 | |||||
| S (x) | Standard range, see table 2 | ||||||
| Body Material | S | الفولاذ المقاوم للصدأ | |||||
| L | Aluminum Alloy | ||||||
| Movement Material | S | Anti-corrosive ABS | |||||
| L | Aluminum Alloy | ||||||
| N | No special structure | ||||||
| A | Dedicated for oxygen | ||||||
| B | Dedicated for compressed air | ||||||
How to order JCWQ series gas turbine flowmeter
1. متوسطة
2. النطاق
3. Pipe size
4. Flow rate
5. Working pressure
6. Working temperature
7. Other requirement
English 
Arabic 
Russian 
French 
Spanish