JC-217 Transmisor de temperatura con visualización in situ

The JC-217 on-site display temperature transmitter is used for the input of resistance temperature detector (RTD) signal and thermocouple (TC) signal and two-wire analog signal output (4−20mA).

Duración del precio: FOB/CIF/EXW/DAP
Paquete: Exportado Caja de madera o de acuerdo a la petición del cliente
Plazo de entrega7 a 10 días laborables
Transportes: Por mar, por aire, por expreso
Puerto de embarque: Puerto de Shanghai
Origen del lugar: Jiangsu
Garantía: 12 meses

Solicite nuestro último precio

Especificación
Operations
Menu settings
Structure diagram
Wiring Diagram
Instrument model

Parámetros técnicos

Entrada
Input Signal	RTD and TC
Scope of Cold Junction Compensation Temperature	-20−70℃
Compensation Accuracy	±1℃
Salida
Output Signal	4−20mA (The input and output are not isolated.)
Load Resistance	RL ≤ (Ue-12)/0.021
Output Current for Upper/Lower Limit Overflow Alarm	IH=21mA、IL=3.8mA IH=21mA and IL=3.8mA
Output Current for Input Break Alarm	21mA
Fuente de alimentación
Power Supply Voltage	DC12−40V
Other Parameters
Thermal Drift	0.01%FS/℃
Tiempo de respuesta	700ms, reaches 90% of the final value.
Environment Temperature	-20−70℃
Clase de protección	IP65, anti-dust and anti-spray
Conexión	M27×2 internal thread
EMC	Comply with the industry equipment application requirements in GB/T18268 (IEC 61326-1).

Input Type and Transmission Accuracy:

Modelo	Symbol	Signal Type	Measurement Range	Minimum Measurement Range	Range Scope	Transfer Accuracy
Resistance Temperature Detector (RTD)	Pt100	Pt100	-199.9−850.0℃	10℃	≤100℃	0.2%
					>100℃	0.1%
		Cu50	-50.0−150.0℃	10℃	≤100℃	0.2%
					>100℃	0.1%
Thermocouple (TC)		B	400−1800℃	500℃	≤300℃	0.2%
					>300℃	0.1%
		E	-100−1000℃	50℃	≤300℃	0.2%
					>300℃	0.1%
		J	-100−1200℃	50℃	≤300℃	0.2%
					>300℃	0.1%
		K	-180−1372℃	50℃	≤300℃	0.2%
					>300℃	0.1%
		N	-180−1300℃	50℃	≤500℃	0.2%
					>500℃	0.1%
		R	-50−1768℃	500℃	≤500℃	0.2%
					>500℃	0.1%
		S	-50−1768℃	500℃	≤500℃	0.2%
					>500℃	0.1%
		T	-200−400℃	50℃	≤500℃	0.2%
					>500℃	0.1%
		Wre3-25 (Reserved)	0−2315℃	500℃	≤500℃	0.2%
					>500℃	0.1%
		Wre5-26 (Reserved)	0−2310℃	500℃	≤500℃	0.2%
					>500℃	0.1%

NOTE:
1. Environment temperature for measuring the above accuracy is 20℃±2℃.
2. The output accuracy “%” is the allowance of the set range scope.
3. When measuring the TC, the allowance of cold junction compensation should be considered. The internal allowance of cold junction compensation is smaller than or equal to ±1℃.

Button Descriptions:

Set button (M)	Used for switching among menu parameters. After modifying and saving the menu, press and hold the button back to the measurement value screen.
Decrease button (S)	Used for decreasing or modifying the current flickering position. Press and hold the button to move the modification position to the right.
Increase button (Z)	Used for increasing or modifying the current flickering position. Press and hold the button to move the modification position to the left.

In the work status, press and hold the Set button for 5 seconds to display the unlock symbol (LOC); Make LOC=1 and press the Set button to enter the menu. Press the Set button to change parameters and then press the Increase or Decrease button to modify parameter values.

Symbol	Parámetro	Range Scope	Descripción	Factory Default
	Loc	0−50000	Electronic lock	0
	Sn	Refer to the input type list.	Sensor type	Pt100
	Unidad	℃, F, R, K	Temperature unit ℃: Celsius temperature F: Fahrenheit temperature R: Rankine temperature K: thermodynamic temperature	℃
	Filt	0−4	Damping coefficient	0
	oPL	-199.9−6300.0	Lower range limit	-199.9
	oPH	-199.9−6300.0	Upper range limit	6300.0
	PB	-199.9−200.0	Measurement value transfer (zero-point)	0
	PK	0.0000−1.9999	Measurement value transfer (gain)	1.0000
	T-PB	-199.9−200.0	Modification of cold junction temperature	0
	Fout	3.800−21.000	Fault output current	21.000
	diR	0−1	Current output direction diR=0: output 4−20mA diR=1: output 20−4mA	0
	FiX	0.000−21.000	Constant current output: if the set value range is less than 3.800−21.000, the output is fixed based on the set value and is independent of the measurement.	0.000

Structure Diagram

Wiring Diagram

Instrument Model

Descargue nuestro catálogo

Obtenga nuestro mejor presupuesto