- Síguenos
JC090 Caudalímetro electromagnético sanitario
Sanitary Electromagnetic Flowmeter is used in sanitary industries, such as food, pharmaceutical, etc.
- Duración del precio: FOB/CIF/EXW/DAP
- Paquete: Exportado Caja de madera o de acuerdo a la petición del cliente
- Plazo de entrega7 a 10 días laborables
- Transportes: Por mar, por aire, por expreso
- Puerto de embarque: Puerto de Shanghai
- Origen del lugar: Jiangsu
- Garantía: 12 meses
- Introducción
- Característica
- Parámetros
- Modelo
- Cómo hacer un pedido
- Aplicación
Caudalímetro electromagnético sanitario
Sanitary Electromagnetic Flowmeter is used in sanitary industries, such as food, pharmaceutical, etc., require timely high-temperature steam to sterilize and clean in processes, the remaining medium be not allowed to stay on the place where pipe connection to prevent the bacilli propagate, therefore a quick install meter with hoop produced in sanitary industries.
● Simple structures, firm, no movable parts, and long operation life
● No intercepting fluid parts, no pressure loss, and fluid clogging
● No mechanical inertia, quick response, and good stability apply in the automatic examination, adjustment, and control
● Measuring accuracy is not influenced by physical parameters such as style, temperature, viscosity, density, and pressure.
● Employ Teflon or rubber liner and different combinations of an electrode material such as Hastelloy C, Hastelloy B, 316L,
● Titanium and adapt to the need of different mediums.
● Supply many styles of flowmeters such as inline type and insertion type, etc.
● Adopt EEPROM memory to measure operation data, safe and reliable protection of memory.
● Integral type flowmeters and remote type flowmeters.
● LCD backlight display with high clearness
Parámetros técnicos
| Diámetro adecuado | DN10~DN80 (below DN25 non-standard, which should be customized) |
| Electrodos Materiales | 316L (acero inoxidable), Hastelloy C, Hastelloy B, Titanio, Tántalo |
| Fluido adecuado | Líquido con una relación de conductividad superior a 5 μs/cm |
| Rango de medición | 0,1~10m/s (ampliable a 15m/s) |
| Límite superior del intervalo | 0,5~10m/s. 1~5m/s recomendado |
| Precisión | 0.3%, 0.5%,1.0% |
| Señales de salida | 4~20mADC, load<= 750ohm, 0~3kHz, 5V with source and changeable width. high terminal and effective frequency output, RS485 interface |
| Presión de funcionamiento | 1,0MPa, 1,6MPa, 4,0MPa, 16MPa (especial) |
| Temperatura del fluido | -20C~80C, 80C~130C, 130C~180C Depending on Lining Material |
| Temperatura ambiente | Sensor -40C~80C. transductor -15C~50C |
| Humedad ambiente | <= 85%RH (a 20C) |
| Tamaño de la salida de cable | M20(16) ×1.5, 1/2″ NPT |
| Fuente de alimentación | 220VAC±10%, 50Hz±1Hz, 24VDC±10% |
| Consumo de energía | <=8W |
| Grados de protección | Tipo integral: IP65. tipo remoto: sensor IP68, transductor IP65 |
| Materiales del revestimiento | PTFE, caucho blando, caucho duro, PFA, etc. |
| Conexión a proceso | Thread: NPT, BSP, G Tri-clamp connection |
| Materiales de puesta a tierra | 316L (acero inoxidable), HC, Ti, Ta, Cu |
| Material de la carcasa | Acero al carbono, 304SS, 316SS |
| Gama | DN15 to DN 80 |
| Liner | PTFE or F46 |
| Rated pressure | 1.6Mpa, Special custom-made |
| Material del cuerpo | Stainless Steel (304SS) |
Selección de modelos
| Code | Diámetro nominal (mm) |
Caudal (m3/h) |
| JC-090-10 JC-090-15 JC-090-20 JC-090-25 JC-090-32 JC-090-40 JC-090-50 JC-090-65 JC-090-80 |
Dn10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 |
0.085-2.8 0.19~6.36 0.34~11.3 0.53~17.66 0.87~28.94 1.36~45.22 2.12~70.65 3.58~119.40 5.43~180.86 |
| Código | Material del electrodo |
| K1 K2 K3 K4 K5 K6 K7 |
SS 316L Hastelloy B Hastelloy C Titanio Tántalo Aleación de Pt/Iridio Pintura de acero inoxidable Carburo de tungsteno |
| Código | Material de la camisa | |
| C1 C2 C3 C4 C5 C6 C7 |
PTFE (F4 o teflón) Etileno propileno fluorado (FEP) Fs PO (Goma blanda) Caucho de poliuretano (PUR) Goma dura PFA |
| Código | Función |
|
E1 F3 |
Clase 0.3% Clase 0.5% Clase 1.0% 4~20mADC, carga ≤750Ω 0~3kHz, 5V activo, pulso cambiable, terminal alto y salida de frecuencia efectiva Interfaz RS 485 (Modbus) HART Temperatura normal Alta temperatura Ultra Temperatura 1,0MPa 1,6MPa 4,0MPa 16MPa Presión especial 220VAC+10%; 50Hz+ 1Hz 24VDC+10% Funciona con pilas Tipo integral Tipo remoto Antideflagrante, Integral Flange connection (standard: ANSI, JIS, DIN, GB) Thread connection (NPT, BSP, G) Conexión sanitaria Tri-clamp |
| Código | Diámetro nominal (mm) |
Caudal (m3/h) |
Código | Diámetro nominal (mm) | Caudal (m3/h) |
Cómo hacer un pedido
Model:□Pipe flange type;□Inserted type;□Integral type;□Remote type
Pipe DN mm; pipe PN MPa; Accuracy %
Measuring Liquid: □liquid;□gas;□saturated steam;□overheat steam;□mix steam
Measuring pipe material:□carton steel;□SS;□other:
Flow direct:□→;□←;□↑;□↓; other:
Installation Place:□Outdoor;□Indoor;□Other:
Fluid Viscosity: Fluid（Gas)Relative humidity %
Fluid density:Standard state kg/m3,operating state kg/m3
Flow rate: □Max m3/h,Min m3/h, Nor. m3/h
□Max Nm3/h,Min Nm3/h, Nor. Nm3/h
□Max kg/h,Min kg/h, Nor. kg/h
Working pressure:□Max MPa, Min MPa, Nor. MPa;
Pressure compensation: □Yes□No
Working temperature: □Max ℃, Min ℃, Nor. ℃;
Temperature compensation: □Yes □No
Signal output:□Field indication; □4～20mA;□Pulse;□RS485;□0～10V;
Working condition:□Nor.;□vibration;□Damp;□flammable and combustible;□temperature ℃
Fluid flow characteristics:□steady flow;□pulsating flow;□phase flow;□multiphase flow
Fluid state:□cleaning;□with trace gases;□with solid particle;□wet gas;□crystallizing;□dirty dirt
Special requirement：
English 
Arabic 
Russian 
French 
Spanish