- Síguenos
ZMZPF46 Corrosion Resistant PTFE PFA Lined Pneumatic Globe Control Valve
PFA PTFE lined globe control valve is produced by high temperature molding lined fluoroplastic process in the valve body wall and the valve trim. It can completely cut off the contact between the corrosive medium and the valve body, then it enhances the service life of valve. The PFA PTFE lined control valve is widely used for acid, alkali, salt and other strong corrosive medium, also used for gas.
- Introducción
- Parámetros
- Dimensión
- Cómo hacer un pedido
- Vídeo
Corrosion Resistant PTFE PFA Lined Globe Control Valve
En PFA PTFE lined globe control valve is produced by high temperature molding lined fluoroplastic process in the valve body wall and the valve trim. It can completely cut off the contact between the corrosive medium and the valve body, then it enhances the service life of valve. The PFA PTFE lined control valve is widely used for acid, alkali, salt and other strong corrosive medium, also used for gas and liquid medium that are easily volatilize and penetrate.
Performance Characteristics of PTFE PFA Lined Globe Control Valve
1. Corrosion resistance: It can withstand almost all the corrosion of medium (including concentrated nitric acid and aqua regia);
2. Good sealing performance: It adopts two kinds of combined sealing structure of bellows seal and V-type PTFE & PFA packing to ensure no leakage;
3. Small leakage: Since the valve core and the valve seat are soft sealed, the leakage is low.
1.Body/Bonnet : WCB,LCB,304,316,316L
2.Plug Material: 304,316
3.Lining Material: PO,PE,PP,F46,F4,PFA
4.Bellows Material: PTFE,PFA
5.Stem Material: 17-4PH ASTM A276 F304
6.Body Type: straight-through way/angle type/jacket insulation type
7.Bonnet Type: standard type
8.Temperature: -30℃~180℃
9.Stem Sealing Type: packing sealing,bellows sealing
10.Leakage Class: ANSI B16.104 VI
11.Flow Characteristic: equal percentage,linear,quick open and shut-off
12.Connetction Type: Flange(RF,FM)
13.Rangeability: 30:1/50:1
14.Flange Standard: HG20592-2009,ANSI B16.5
15.Linear Actuator: pneumatic diaphragm,pneumatic piston,electric actuator,electric hydraulic actuator
Actuator Technical Parameters
| Tipo de actuador | Tipo diafragma neumático | |
| Presión de suministro de aire | 140KPa | 340KPa |
| Gama Primavera | (20-100KPaG) | (80-240KPaG) |
| Conexión eléctrica | NPT1/4、NPT3/8 | |
| Positive Action | La válvula se cierra al aumentar la presión del aire | |
| Opposite Action | Valve open when air pressure increasing | |
| Contragolpe | <1.5% （con posicionador） | |
| Zona muerta | <1% （con posicionador） | |
| Temperatura | -10〜70°C | |
| Pintura Color | Verde claro | |
| Accesorios | Positioner, solenoid valve, limit switch,
filter pressure reducing valve,lock valve, air control valve |
|
Application Temperature and Medium of Liner Mateiral
| Lined Material | Suitable Temperature | Suitable Medium |
| PO | -10°C~+70°C | Corrosive medium such as acid, alkali,
salt (except strong oxidizing agent) |
| PE | -10°C~+70°C | |
| PP | -10°C~+70°C | |
| FEP/F46 | -30°C~+120°C | Any concentration of acids, alkali,
salts and highly corrosive media |
| PTFE/F4 | -30°C~+150°C | |
| PFA | -60°C~+180°C |
| DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 |
| L | 130 | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | 730 | 850 | 980 |
| H | 158 | 170 | 180 | 185 | 210 | 210 | 270 | 300 | 307 | 365 | 380 | 440 | 530 | 585 | 685 |
| H1 | 95 | 95 | 95 | 95 | 95 | 95 | 110 | 110 | 110 | 135 | 135 | 135 | 170 | 170 | 170 |
| H2 | 35 | 35 | 35 | 35 | 35 | 35 | 45 | 45 | 45 | 55 | 55 | 55 | 60 | 60 | 60 |
| A | 48 | 55 | 58 | 70 | 75 | 85 | 108 | 126 | 140 | 170 | 202 | 268 | 415 | 415 | 485 |
| M | M12*1.25 | M16*1.5 | M20*1.5 | M24*1.5 | |||||||||||
Ordering Note
1. Medium
2. Nominal diameter, seat diameter
3. Flow rate
4. Nominal pressure and flange type
5. Working temperature
6. Acting form: open air or close air
7. Natural Flow feature
8. Body and valve components material
9. Accessory: positioner, pressure reducer, hand wheel
10. Pneumatic or electric type
ZMZPF46 Corrosion Resistant PTFE PFA Lined Globe Control Valve
English 
Arabic 
Russian 
French 
Spanish