JC200 Thermal Flow Switch /Sensor

JC200 Thermal Flow Switch is based on two temperature sensors that are positioned within the medium. The unheated sensor registers the liquid temperature.

Durée du prix: FOB/CIF/EXW/DAP
Paquet: Caisse en bois exportée ou selon la demande du client
Délai de livraison7 à 10 jours ouvrables
Transports: Par mer, par air, par grand express
Port d'embarquement: Port de Shanghai
Origine du lieu: Jiangsu
Garantie: 12 mois

JC200 Thermal Flow Switch, the other sensor is heated a few degrees above the medium, when the medium flows, the heat generated in the sensor is conducted away by the medium. The temperature of the sensor is measured and compared to the temperature of the medium. The state of flow can be derived by the temperature difference.

Demande de nos derniers prix

Caractéristiques
Spécifications
Câblage
Dimension
Montage
Ordering
Accessory

No moving parts – no maintenance is nee
One single model is good for multiple pipe size
Compact design
Low–pressure loss
LED displays flow trend and switching state

Measuring range:	1…150cm/s(Water), 3…300cm/s(Oil)
Measuring range:	20…2000cm/s(Air)
Output:	PNP, NPN, Relay, Analog (4…20mA)
Output:	PNP + NPN (SPDT)
Power supply:	24V±20%DC
Operating current::	Max. 400 mA(PNP / NPN)
Operating current::	Max. 1A@48V ac/dc(Relay)
No-load current:	Max. 80mA
Display:	6-LEDs
Calibrating:	Potentiomètre
Pressure rating:	100bar
Temperature gradient:	≤4℃/s
Response time:	1–13s, Typically 2s
Initialization time:	8s
Wiring protection:	Reverse polarity, Overvoltage and Short-circuit
Protection class:	IP67
Medium temp.:	-20–80℃
Ambient temp.:	-20–80℃
Storage temp.:	-20–100℃
Electrical connection:	M12 plug
Materials:	Sensor: stainless steel
Materials:	Housing: stainless steel
Weight:	0.4kg

Wiring JC200 Flow Switch

Dimension JC200 Flow Switch

Mounting JC200 Flow Switch

FT11N	–	G12	H	D	P	P	Q	Description
JC200	–							Model# Electronic flow switch (sensor)
		G12						Thread G1/2
		G14						Thread G1/4
		N12						Thread NPT1/2
			H					Male thread
				D				DC 24V±20% power supply
					P			PNP output
					N			NPN output
					C			Relay output
					A			4…20mA output
						R		PNP + NPN output (SPDT)
						–		4…20mA output
							Q	M12 plug

ST04-	PU	02	F	G	Description
ET04-					M12 Cable outlet
ST04-					M12 self locking screw plug
	PU				Material: PUR
		02			Length: 2M
		05			Length: 5M
		10			Length: 10M
			F		Female plug
				G	Straight plug
				W	Right angle plug

Note: Model with relay output needs 5-pin plug – change S(E)T04 to S(E)T05 when ordering.

Télécharger notre catalogue

Obtenez notre meilleur devis