- Suivre les États-Unis
JC091 Débitmètre électromagnétique à pile d'insertion
JC091 Insertion Battery Electromagnetic Flowmeter is a new fluid flowmeter developed based on pipe-type electromagnetic flowmeter. Besides preserving the merits of pipe-type electromagnetic flowmeter and considering such defects of pipe-type electromagnetic flowmeter as difficult installation on large pipes and high cost.
- Introduction
- Paramètres
- Modèle
- Comment commander
- Vidéo
JC091 Insertion Battery Electromagnetic Flowmeter
JC091 Insertion battery Electromagnetic Flowmeter is a new fluid flowmeter developed based on pipe-type electromagnetic flowmeter. Besides preserving the merits of pipe-type electromagnetic flowmeter and considering such defects of pipe-type electromagnetic flowmeter as difficult installation on large pipes and high cost.
Compared to ordinary electromagnetic flowmeter, sensor of insertion electromagnetic flowmeter generates external emission magnetic field on outer side. The measuring electrodes are at the ends or on both sides of the sensor. Principle of electromagnetic flowmeter is shown in the figure below. It is noteworthy that in external emission magnetic field, the induction signal of electromagnetic flow sensor will reduce the linearity of measurement in case of being affected by fluid and thickness of the magnetic field’s boundary layer.
In terms of JC091 insertion electromagnetic flowmeter, conducting liquid in pipeline is the conductor moving in magnetic field and distance between two electrodes is the length (L) of conductor.
Technical Parameter for JC091 Insertion Battery Electromagnetic Flowmeter
|
JC091 Power ：24 VDC or 220 VAC
|
 |
 |
| Compact type | Remote control type | |
|
JC091 Power ：Battery type |
 |
 |
| With built in pressure sensor | IP 68 | |
| Précision | ±0.5%~±1.5% (under reference conditions) | |
| Caliber (mm) | DN100~DN3000 | DN100~DN3000 |
| Bride | Conforming to GB9119, stainless steel | |
| Pressure rating | 1,6MPa | |
| Material of converter housing | Die-cast aluminum alloy | |
| Material of sensor housing | Acier inoxydable | |
| Material of sensor structure | Stainless steel/PVDF | |
| Poids | 6 kg | |
| Electrical conductivity | ≥5μs/cm (negotiate with us for ordering in case of less than 5μs/cm) | |
| Electrode | 316L, hastelloy, titanium, tantalum and platinum | |
| Protection grade | IP65 | IP65/IP67(IP68 is optional to sensor) |
| Medium temperature | -25℃~80℃ | -25℃~120℃ |
| Température ambiante | -25℃~60℃ | |
| Effect of ambient temperature | <±0.1%/10℃ or <±0.25%/10℃ | |
| Repetitiveness | ≤±0.01% or ≤±0.25% | |
| Analog output error | ≤±0.02mA | |
| Flow rate within measuring range | ≤10m/s | |
| Available to be buried | — | ≤5m (only IP68) |
| Electrical connection | M20*1.5 seal, G1/2 and NPT1/2 | |
| Sensor cable | <30M (negotiate with us for ordering in case of over length) | |
Model Selection for JC091 Insertion Remote Electromagnetic Flowmeter
| Code | Diamètre nominal
(mm) |
Plage de débit
(m3/h) |
Code | Diamètre nominal (mm) | Plage de débit
(m3/h) |
|||||||
| JC091-100
JC091-125 JC091-150 JC091-200 JC091-250 JC091-300 JC091-350 JC091-400 JC091-450 JC091-500 JC091-600 JC091-700 JC091-800 JC091-900 JC091-1000 |
DN100
DN125 DN150 DN200 DN250 DN300 DN350 DN400 DN-450 DN-500 DN-600 DN-700 DN-800 DN-900 DN-1000 |
8.48~282.6
13.25~441.56 19.08~635.85 33.91~1130.40 52.99~1766.25 76.30~2543.40 103.86~3461.85 135.65~4521.60 171.00~5722.65 211.95~7065.00 305.21~10173.00 415.42~13847.40 542.59~18086.40 686.72~22890.60 847.80~28260.00 |
JC091-1200
JC091-1400 JC091-1600 JC091-1800 JC091-2000 JC091-2200 JC091-2400 JC091-2600 |
DN-1200
DN-1400 DN-1600 DN-1800 DN-2000 DN-2200 DN-2400 DN-2600 |
1220.83~40694.40
1661.69~55389.60 2170.37~72345.60 2746.87 ~91562.40 3391.20~113040.00 4103.35~136778.40 4883.33~162777.60 5731.13~191037.60 |
|||||||
| Code | Matériau de l'électrode | |||||||||||
| K1
K2 K3 K4 K5 K6 K7 |
SS 316L
Hastelloy B Hastelloy C Titane Tantale Alliage Pt/Iridium Peinture sur acier inoxydable Carbure de tungstène |
|||||||||||
| Code | Matériau du revêtement | |||||||||||
| C1 | PVDF
|
|||||||||||
| Code | Fonction | |||||||||||
| E1
E2 E3 F1 F2
F3 F4 T1 T2 T3 P1 P2 P3 P4 P0 D1 D2 D3 J1 J2 J3 J4 |
Class 1.5%
Classe 1.0% Class 2.5% 4~20mADC, charge ≤750Ω 0~3kHz, 5V actif, impulsion modifiable, borne haute et sortie fréquence effective Interface RS 485 (Modbus) HART Température normale Haute température Ultra Température 1,0MPa 1,6MPa 4,0MPa 16MPa Pression spéciale 220VAC+10%; 50Hz+ 1Hz 24VDC+10% Fonctionnement sur piles Type intégral Type à distance Antidéflagrant With built-in pressure sensor |
|||||||||||
How to order JC091 Insertion Remote Electromagnetic Flowmeter
- Moyen
- Taille du tuyau
- Pression de service
- Température de travail
- Alimentation électrique
- Autre exigence
Video -JC091 Insertion Battery Electromagnetic Flowmeter
English 
Arabic 
Russian 
French 
Spanish