JC-1100 Single-Circuit Digital Display PID Controller
JC-1100 (simple) single-circuit digital display controller provides easy operation with measurement precision of 0.3%; 7 types of dimensions available; double four-digit LED display, supporting thermocouple, thermal resistance, voltage (extraction operation available), current (extraction operation available), and transducer input; applicable to measurement of industrial process quantifiers including temperature, pressure, flow, liquid level, and humidity etc. Supporting 2-way alarm, 1-way control output or RS485 communication interface adopting standard MODBUS protocol, 1-way DC24V feed output; photoelectric isolation between input, output and power end; 100-240V AC/DC or 20-29V DC switch power supply; standard snap-in installation; operating temperature: 0-50℃, relative humidity: 5-85% RH without coagulation.
JC-1100 (simple) single-circuit digital display controller
The PID controller stabilizes the gain but produces a constant steady-state error, the I-controller eliminates steady-state error, while controller D minimizes the rate of change of the error.
- It overcomes the deficiencies of other control types.
- PID controller operation does not require much experience.
- Process independent.
- Maintenance-friendly.
- It can provide precise control of the set point.
Single-circuit Digital Display Controller
JC-1100 Single-Circuit Digital Display PID Controller
Profile of Display Panel
(1) PV Display (measured value)
(2) SV Display
Display parameters like input type in measurement mode;
Display setting value in parameters setting mode;
(3) Primary alarm (AL1) and secondary alarm indication lamp, running lamp (RUN) and output lamp (OUT);
(4) Confirmation (5) Shift (6) Decrease (7) Increase
