JC0015 Pressure Controller
■ The controller adopts diaphragm type sensor and can be used with neutral gases such as air, gas, water, hydraulic oil, light fuel oil, lubricating oil, and other liquid media that do not corrode the pressure sensor material.
■ The setting value of the controller is adjustable, and the adjustment range is 0.02~3MPa.
■ Compact structure, small size, and particularly good vibration resistance.
- Price Term: FOB/CIF/EXW/DAP
- Package: Exported Wooden case or according to customer request
- Delivery Time: 7 to 10 working days
- Transports: By sea, by air, by high express
- Shipment Port: Shanghai Port
- Origin of Place: Jiangsu
- Warranty: 12 Months
- Main Technical Performance
- Specification
- External Dimensions And Mounting Dimensions (Unit: mm)
- Electrical Wiring Diagram
| Operating Viscosity | <1× 10-3m2/s |
| Switching Element | Micro switch |
| Enclosure Protection Class | IP65 (According to DIN40050, Equivalent to IP65 in GB4208) |
| Ambient Temperature | －5℃~40℃ |
| Medium Temperature | 0～90℃ |
| Anti-Vibration Performance | Max：100 m/s2 |
| Repeatability Error | ≤1.5% |
| Contact Capacity | AC 220V 6A (Resistance) |
Switching Difference Is Not Adjustable
| Set Value
Adjustment Range Mpa |
Switching
Difference Is Not Greater Than Mpa |
Maximum Allowable Pressure
①Mpa |
Switching Times
Times/Min |
Pressure Sensor Materials | Pressure
Interface type② |
Interface Female thread | W
Kg |
Dimension
Drawing |
|
| Housing | Seals and diaphragms | ||||||||
| Adjust The Setting With The Hexagonal Screw With Plastic Protective Cover: | |||||||||
| 0.02～1.2 | 0.14 | 5 | 60 | AL | Nitrile rubber | I | G1/4″ | 0.4 | 01 |
| 0.05～3 | 0.2 | I | |||||||
| 0.02～1.2 | 0.14 | P | 02 | ||||||
| 0.05～3 | 0.2 | P | |||||||
Note: ①In practice, even brief pressure peaks must not exceed this value.
②I-Interface is female thread P-Interface is flange
Controller Selection And Installation Instructions
See controller selection and installation for details
Adjustment Of The Set Value
For details, see the adjustment of the pressure controller set value example 4
01
02
03
The process of single knife double-throw micro switch action.
Wiring terminal 1-3 pressure rise to the upper switching value is disconnect;
Wiring terminal 1-2 pressure rise to the upper switching value is switched on .
