JC0104 Dual Contact Pressure Controller
■ The controller adopts a diaphragm type sensor, which can be used for neutral gas and liquid medium, and some specifications can be used for corrosive medium.
■ The controller setting value is adjustable, and the adjustment range is 0～1MPa.
■ Can be used for air, gas, water, water vapor, oil, and other media.
- Price Term: FOB/CIF/EXW/DAP
- Package: Exported Wooden case or according to customer request
- Delivery Time: 7 to 10 working days
- Transports: By sea, by air, by high express
- Shipment Port: Shanghai Port
- Origin of Place: Jiangsu
- Warranty: 12 Months
|Switching Elements||Micro Switch|
|Ambient Temperature||－5℃ ～40℃|
|Medium Temperature||0℃ ～120℃|
|Installation Position||Pressure connection vertical down (15°tilt allowed)|
|Vibration Resistance||Max 20m/s2|
|Synchronicity Error||≤0.5% (refers to the synchronization error of the lower switching value ①)|
|Contact Capacity||AC 220V 6A (resistive) 600VA|
Switching Difference Is Not Adjustable
Difference Is Not Greater Than
|Maximum Allowable Pressure
|Pressure Sensor Materials||Interface Female Thread||W
|Dimension Drawing No.|
|0～0.01||0.0018||0.1||10||Stainless Steel||Stainless steel
① Require synchronization of the upper switching value, which should be specified in the order.
②In actual operation, even brief pressure peaks should not exceed this value.
Controller Selection And Installation Instructions
See controller selection and installation for details
Adjustment Of The Set Value
See the adjustment of the set value of the pressure controller example 1 and example 2
Single knife double-throw micro switch process:
Wiring terminals 1-2,4-5 Pressure rise to the upper switching value is disconnected;
Wiring terminals 1-3,4-6 Pressure rise to the upper switching value is turned on.