JCWTYK-11B Pressure Type Temperature Controller
â– Â JCWTYK-11B pressure type temperature controller with temperature package type sensor. It can be used to cool liquid media such as water or oil.
- Price Term: FOB/CIF/EXW/DAP
- Package: Exported Wooden case or according to customer request
- Delivery Time: Â 7 to 10 working days
- Transports: By sea, by air, by high express
- Shipment Port: Shanghai Port
- Origin of Place: Jiangsu
- Warranty: 12 Months
- Main Technical Performance
- Specification
- Controller Selection And Installation Instructions
- External Dimensions And Mounting Dimensions (unit: mm)
Contact capacity:
Controller general specifications using AK1-1 type micro switch, the contact rated load for DC 27 volts 15 amps.
Controller 78 ℃ specifications using WKI-6 type micro switch, the contact rated load for DC 27 volts 10 amps.
The test proves that both AK1-1 and WKI-6 micro switches can achieve the following on-off capacities: When the DC voltage is 110 volts
(1) Inductive load: (time constant is 100 ms) the turn-on current is 0.5 A and the break-off current is 0.5 A
(2) Resistive load: 12.5 amps turn-on current, 1 amp turn-off current.
JCWTYK-11BÂ Switching Difference Is Not Adjustable
| NO. | Setting ℃
 |
Switching Difference Range
℃ |
Set Value Error
℃ |
Repeatability Error
℃ |
Maximum Temperature Of Medium |
| 1 | 40 | 1.5～4
|
±2
|
1 | 100℃
|
| 2 | 45 | 1.5～4
|
±2
|
1 | 100℃
|
| 3 | 60 | 1.5～4
|
±2
|
1 | 100℃
|
| 4 | 65 | 1.5～4
|
±2
|
1 | 100℃
|
| 5 | 78 | 4～7
|
±2
|
1 | 100℃
|
| 6 | 85 | 1.5～4
|
±2
|
1 | 100℃
|
| 7 | 90 | 1.5～4
|
±2
|
1 | 100℃
|
| 8 | 95 | 2～5 | ±2
|
1 | 100℃
|
| 9 | 110 | 2～5 | ±2
|
1 | 100℃
|
| 10 | 120 | 2～5 | ±2
|
1 | 100℃ |
Note: the above switching value of this controller is the set value.
- The controller can be screwed directly into the pipeline of the controlled medium using its threaded part,the installation port is sealed, and the Sensory temperature pack should be fully immersed in the controlled medium.
- Circuit wiring can be through the small plug holder, which is wired to the switch as shown in the figure below.
