JC0102/ JC0103 Pressure Controller
■ Our controller adopts diaphragm type sensor, some specifications of the sensor shell material is stainless steel, can be used for corrosive media, also can be used for air, gas, water vapor and other neutral gases and oil and other liquid media.
- Price Term: FOB/CIF/EXW/DAP
- Package: Exported Wooden case or according to customer request
- Delivery Time: 7 to 10 working days
- Transports: By sea, by air, by high express
- Shipment Port: Shanghai Port
- Origin of Place: Jiangsu
- Warranty: 12 Months
■ The setting value of the controller is adjustable,The adjustment range is 0~1MPa.
■ High control sensitivity in the low pressure range.
- Main Technical Performance
- Specification
- External Dimensions And Mounting Dimensions (Unit: mm)
- Electrical Wiring Diagram
| Normal Type | Explosion-proof | |
| Operating Viscosity
|
<1×10－3m2/s | <1×10－3m2/s |
| Switching Element | Micro switch | Sealed Switches |
|
Explosion Protection Class |
— | Exde Ⅱ CT4~T6 Certificate of Conformity No.: GYB19.1360X |
|
Enclosure Protection Level
|
IP65(Conforms to DIN40050, equivalent to IP65 in GB4208) | IP65 (Conforms to DIN40050, equivalent to IP65 in GB4208) |
| Ambient Temperature | －5℃~40℃ | －5℃~40℃ |
| Medium Temperature | 0~120℃ | 0~95℃ |
| Installation Position | — | Pressure connection vertically down |
| Anti-Vibration Performance | 20m/s2 | Max: 20m/s2 |
| Repeatability Error | ≤1.5% | ≤1.5% |
|
Contact Capacity |
AC 220V 6A (Resistance) | DC 250V 0.25A(Resistance) 60Wmax
AC 250V 5A(Resistance) 1250VAmax |
JC0102 Switching Difference Is Not Adjustable
| Set Value
Adjustment Range Mpa |
Switching
Difference Is Not Greater Than Mpa |
Maximum Allowable Pressure
①Mpa |
Switching Times
Times/Min |
Pressure Sensor Materials | Interface Female Thread | W
（Kg） |
Dimension Drawing | ||
| Housing | Diaphragm | Normal | Ex-Proof | ||||||
| 0~0.01 | 0.0012 |
0.1 |
10 | Stainless Steel | Stainless Steel
00Cr17 Ni14 Mo2 (316L) |
G1/4″ |
0.9 |
01 | 03 |
| 0~0.025 | 0.0018 | ||||||||
| 0~0.04 | 0.0025 | ||||||||
| 0.05~0.4 | 0.06 | 10② | Stainless Steel
1Cr18Ni 9Ti |
02 | 04 | ||||
| 0.05~0.6 | 0.07 | ||||||||
| 0.05~1 | 0.1 | ||||||||
JC0102 Switching Difference Is Adjustable
| Set Value
Adjustment Range Mpa |
Switching
Difference Is Not Greater Than Mpa |
Maximum Allowable Pressure
①Mpa |
Switching Times
Times/Min |
Pressure Sensor Materials | Interface Female Thread | W
（Kg） |
Dimension Drawing | ||
| Housing | Diaphragm | Normal | Ex-Proof | ||||||
| 0~0.01 | 0.004 |
0.1 |
10 | Stainless Steel | Stainless Steel
00Cr17 Ni14 Mo2 (316L) |
G1/4″ | 0.95 | 01 | 03 |
| 0~0.025 | 0.005 | 0.9 | |||||||
| 0~0.04 | 0.007 | 0.95 | |||||||
| 0.05~0.4 | 0.18 | 10② | Stainless Steel
1Cr18Ni 9Ti |
0.95 | 02 | 04 | |||
| 0.05~0.6 | 0.22 | ||||||||
| 0.05~1 | 0.3 | ||||||||
JC0103 Switching Difference Is Not Adjustable (Small Switching Difference, No Explosion-Proof Type)
| Set Value
Adjustment Range Mpa |
Switching
Difference Is Not Greater Than Mpa |
Maximum Allowable Pressure
①Mpa |
Switching
Times Times/Min
|
Pressure Sensor Materials | Interface Female Thread | W
（Kg） |
Dimension Drawing | ||
| Housing | Diaphragm | Normal | Ex-Proof | ||||||
| 0~0.01 | 0.0006 | 0.1 | 10 | Stainless Steel | Stainless Steel
00Cr17 Ni14 Mo2 (316L) |
G1/4″ | 0.9 | 01 | |
| 0~0.025 | 0.001 | ||||||||
| 0~0.04 | 0.0018 | ||||||||
| 0.05~0.4 | 0.035 | 10② | Stainless Steel
1Cr18Ni 9Ti |
02 | |||||
| 0.05~0.6 | 0.04 | ||||||||
| 0.05~1 | 0.05 | ||||||||
Note: ①In practice, even brief pressure peaks must not exceed this value.
② refers to the static pressure value.
Adjustment Of The Set Value
See the adjustment of the set value of the pressure controller in Example 1, Example 2 and Example 5
Selection And Installation
See Selection and installation of the controller for details
Normal Type
01
02
Ex-proof Type
03
04
Single knife double-throw micro switch action process:
Wiring terminal 1-2 pressure rise to the switching value is disconnected;
Wiring terminal 1-3 pressure rise to the upper switching value on.
