EJCRS Remote Seal Gauge Pressure Transmitter With Capillary
EJCRS Remote Seal Gauge Pressure Transmitter with capillary is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure.
- Introduction
- Parameters
- Model
- How to Order
EJCRS Remote Seal Gauge Pressure Transmitter with capillary
EJCRS Remote Seal Gauge Pressure Transmitter with capillary is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. outputs a 4 to 20 mA DC signal corresponding to the measured gauge/absolute pressure. Other key features include quick response, remote set-up using communications, self-diagnostics and optional status output for pressure high/low alarm. The range Limits is 0—6kPa-25MPa, The flange’s working pressure are 1.6/4MPa,6.4MPa,10MPa,150psi,300psi or 600psi.
Operation Theory and Structure
remote seal gauge/absolute pressure transmitter is composed of series
gauge/absolute pressure transmitter and the welding installation remote seal flange. The operation theory
is the same as series gauge/absolute pressure transmitter (see series gauge/absolute pressure transmitter general specifications), Only the pressure transmission path is different. The pressure loaded in the high or low side, pass from the isolation diaphragm and silicone oil in the flange to the sensor.
Ambient temperature
Min:depends on the fill fluid
Max:85 °C
-20-65°C,with LCD-indicator
Storage temperature/transport temperature
Min depends on the fill fluid
Max 85°C
Humidity:0-100%
Shock resistant: Acceleration 50g,Duration 11ms
Vibration resistance: 2g up to 500Hz
Pressure limits: From vacuum to working pressure.
Flange working pressure
ANSI 150psi-600psi
DIN PN 1.6MPa-PN 10MPa
Weight
DN 50/2”about 7 to 10kg DN 80/3” about 8 to 11kg , DN 4” about 9 to 12kg;
6.4 Supply & Load Requirements
24 V DC supply, R≤(Us-12V)/Imax kΩ,
Imax=23 mA.
Maximum voltage limited: 42VDC,
Minimum voltage limited: 12VDC,
Wetted Parts Materials
Flange 316 stainless steel
Isolating Diaphragm 316L stainless steel / Hastelloy
C/EFP or PFA plated on
316L/Tantalum
Nuts and Bolts 304 stainless steel
Process Connector 316 stainless steel
Fill fluid Silicone oil/ Vegetable oil
Process Connector Gasket Perbunan /NBR/Viton
FKM /Teflon(PTFE)
Amplifier Housing Aluminum with epoxy resin coat
Housing Gasket Perbunan NBR
Name plate and tag 304 stainless steel
Degrees of Protection: IP67
Electrical Connection
The electrical connection is made via cable entry
M20x1.5.The screw terminals are suitable for wire
cross-sections up to 2.5mm2.
Process Connection
The flange comply with the ANSI standard or DIN
standards.
EJCRS Remote Seal Gauge Pressure Transmitter with capillary
Flange sealing device | ||
Flange sealing device | ||
EJC | RN | Without capillary |
RS | With capillary | |
Process connection, Flange and diaphragm material | ||
A | DN50 DIN 2501 | E DN2526 316L stainless steel |
B | DN50 DIN 2501 | E DN2526 Hastelloy C |
C | DN50 DIN 2501 | E DN2526 Tantalum |
H | DN80 DIN 2501 | E DN2526 316L stainless steel |
I | DN80 DIN 2501 | E DN2526 Hastelloy C |
G | DN80 DIN 2501 | E DN2526 Tantalum |
D | DN2″ANSI B 16.5 | RF ANSI B 16.5 316L stainless steel |
E | DN2″ANSI B 16.5 | RF ANSI B 16.5 Hastelloy C |
F | DN2″ANSI B 16.5 | RF ANSI B 16.5 Tantalum |
K | DN3″ANSI B 16.5 | RF ANSI B 16.5 316L stainless steel |
L | DN3″ANSI B 16.5 | RF ANSI B 16.5 Hastelloy C |
M | DN3″ANSI B 16.5 | RF ANSI B 16.5 Tantalum |
N | DN4″ANSI B 16.5 | RF ANSI B 16.5 316L stainless steel |
O | DN4″ANSI B 16.5 | RF ANSI B 16.5 Hastelloy C |
P | DN4″ANSI B 16.5 | RF ANSI B 16.5 Tantalum |
Working pressure | ||
1 | PN 1MPa/4MPa | DIN 2501 |
2 | PN 6.4MPa | DIN 2501 |
3 | PN 10MPa | DIN 2501 |
6 | 150psi | ANSI B 16.5 |
7 | 300psi | ANSI B 16.5 |
8 | 600psi | ANSI B 16.5(not including DN4″ANSI B 16.5 |
Process connections | ||
F | Flat sealing | |
H | Bulge sealing 316L stainless steel,extended diaphragm seal 50mm | |
I | Bulge sealing 316L stainless steel,extended diaphragm seal 100mm | |
G | Bulge sealing 316L stainless steel,extended diaphragm seal 150mm | |
L | Bulge sealing Hastelloy C, extended diaphragm seal 50mm | |
M | Bulge sealing Hastelloy C, extended diaphragm seal 100mm | |
N | Bulge sealing Hastelloy C, extended diaphragm seal 150mm | |
Fill fluid | ||
S | Silicone oil -30-200 °C | |
H | High temp. silicone oil -10-350 °C | |
U | Super high temp. silicone oil -10-400°C | |
V | Vegetable oil 0-250°C | |
Capillary Length | ||
1-10 | 1-10 | 1-10M |
S | S | Special length |
Capillary component characteristics | ||
N | N | None |
P | P | With PVC protective coating capillary |
Diaphragm Protection | ||
N | N | None |
1 | 1 | EFP plated on 316L, ≤180 |
2 | 2 | PFA plated on 316L, ≤260 |
3 | 3 | PTFE coated on 316L[2], ≤200 |
EJCRS Remote Seal Gauge Pressure Transmitter with capillary
1. Medium
2. Range
3. Working pressure
4. Working temperature
5. Process connection
6. Flange size, rating , standard