JCBS Sanitary Gauge Pressure Transmiter
JCBS Sanitary Gauge Pressure Transmiter is used to measure the liquid level and pressure of liquids and gases, and then convert it into a 4-20mADC HART current signal output.
- Introduction
- Parameters
- Model
JCBS Sanitary Gauge Pressure Transmiter
JCBS Sanitary Gauge Pressure Transmiter is used to measure the liquid level and pressure of liquids and gases, and then convert it into a 4-20mADC HART current signal output.
Standard Specifications
(Adjusting the range based on the standard zero point, stainless steel 316L diaphragm,
filling fluid is silicone oil)
1 Performance Specifications
Reference Accuracy of Span Adjusting
±0.1% (including nonlinearity,
hysteresis and repeatability)
If TD>10 (TD=maximum range/adjust range),
it is: RP1002-CS: ±(0.01×TD)%
Ambient Temperature Influence
Total Influence when -25℃～65℃
±(0.15×TD+0.05)%×Span
Total Influence when -40℃～-25℃
And 65℃～85℃
±(0.2×TD+0.05)%×Span
Overrange Influence
±0.075%×Span
Stability
±0.1%×Span /3 yearser
| Model（Gauge Pressure Transmitter） | ||
| JCB | ||
| Output | S | Basic Accuracy 0.1% |
| Span | ||
|
Gauge Pressure |
B | 0-3kPa～6kPa /（0-300～600 mmH2O） |
| C | 0-4kPa～40kPa /（0-400～4000 mmH2O） | |
| D | 0-10kPa～250kPa /（0-1～25 mH2O） | |
| F | 0-100kPa～3MPa /（0-10～300 mH2O） | |
| Diaphragm fill fluid | S | 316L stainless steel Silicone oil |
| C | Hastelloy C Silicone oil | |
| R | Titanium Alloy | |
| Process connector Size | 1 | Tri-clamp 1” / DN 25（Capillary length select 0） |
| 2 | Tri-clamp 1.5” / DN 40 | |
| 3 | Tri-clamp 2” / DN 50 | |
| 4 | Tri-clamp 2.5” / DN 65 | |
| 5 | Tri-clamp 3” / DN 80 | |
| Capillary Length | 0 | None |
| 1to 6 | 1 to 6 M | |
| S | Special | |
| Mounting Bracket | N | None |
| 1 | 304 stainless steel | |
| 2 | Carbon steel galvanized | |
| Integral indicator | N | None |
| 1 | Backlit LCD display | |
| Additional | S | SS housing |
