Pneumatic Diaphragm High Pressure Angle Control Valve
Pneumatic high pressure angle control valve is composed of a pneumatic diaphragm multi-spring actuator and an angular high-pressure valve. And pneumatic high pressure control valve is developed for the problem that the regulating valve has a short service life under the severe working conditions of high pressure or high pressure difference, severe cavitation and erosion.
- Introduction
- Parameters
- Dimension
- How to Order
- Video
Pneumatic Diaphragm High Pressure Angle Control Valve
Pneumatic high pressure angle control valve is composed of a pneumatic diaphragm multi-spring actuator and an angular high-pressure valve. And pneumatic high pressure control valve is developed for the problem that the regulating valve has a short service life under the severe working conditions of high pressure or high pressure difference, severe cavitation and erosion, and the valve stem is easy to break. It is especially suitable for control the fluids that has high viscosity, suspended solids and granular medium. It can avoid coking, sticking and clogging. This high pressure angle control valve is widely used in various chemical and oil refining industries, especially for the control of high pressure and high pressure differential medium in ammonia and urea industries.
Technical Parameters of Pneumatic Diaphragm High Pressure Angle Control Valve
Product name: high pressure angle control valve;
Nominal diameter: 6, 10, 15, 25, 32, 40, 50, 65, 80, 100mm
Nominal pressure: PN22, PN32,and other pressure customized;
Flange standard: H12-67
Upper bonnet: normal type: -40 to +230 °C, heat dissipation type: +230 to +450 °C;
Plug type: single seat contoured plug;
Flow characteristics: equal percentage,linear;
Suitable medium: high viscosity, suspended solids and granular medium;
| Part Name | Body | Stem | Plug | Valve Seat | Packing | Spring |
| Material | 40 forged steel | 2Cr13 | 2Cr13 | 2Cr13 | PTFE | 60Si2Mn |
| stainless steel | stainless steel | resurfacing welding surfacing Co-Cr tungsten carbide | resurfacing welding surfacing Co-Cr tungsten carbide | |||
| 316Ti | 316Ti |
Dimension
| DN(mm) | 6 | 10 | 15 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | |
| L1(mm) | 100 | 105 | 105 | 120 | 135 | 190 | 225 | 275 | 315 | 365 | |
| L2(mm) | 83 | 90 | 105 | 120 | 135 | 165 | 190 | 215 | 260 | 290 | |
| Pneumatic Diaphragm | H(mm) | 407 | 406 | 425 | 401 | 493 | 502 | 500 | 630 | 630 | 620 |
| D(mm) | 285 | 360 | 470 | ||||||||
| Pneumatic Piston | H(mm) | 527 | 526 | 545 | 521 | 586 | 595 | 593 | 655 | 655 | 645 |
| D(mm) | 264 | 352 | |||||||||
How to order Pneumatic Diaphragm High Pressure Angle Control Valve
1. Pipe size
2. Medium
3. Flow rate
4.Working pressure
5.Working temperature
6. Process connection
Video
