- Следуйте за США
Электромагнитный расходомер JC091 с вставной батареей
JC091 Insertion Battery Electromagnetic Flowmeter is a new fluid flowmeter developed based on pipe-type electromagnetic flowmeter. Besides preserving the merits of pipe-type electromagnetic flowmeter and considering such defects of pipe-type electromagnetic flowmeter as difficult installation on large pipes and high cost.
- Введение
- Параметры
- Модель
- Как заказать
- Видео
JC091 Insertion Battery Electromagnetic Flowmeter
JC091 Insertion battery Electromagnetic Flowmeter is a new fluid flowmeter developed based on pipe-type electromagnetic flowmeter. Besides preserving the merits of pipe-type electromagnetic flowmeter and considering such defects of pipe-type electromagnetic flowmeter as difficult installation on large pipes and high cost.
Compared to ordinary electromagnetic flowmeter, sensor of insertion electromagnetic flowmeter generates external emission magnetic field on outer side. The measuring electrodes are at the ends or on both sides of the sensor. Principle of electromagnetic flowmeter is shown in the figure below. It is noteworthy that in external emission magnetic field, the induction signal of electromagnetic flow sensor will reduce the linearity of measurement in case of being affected by fluid and thickness of the magnetic field’s boundary layer.
In terms of JC091 insertion electromagnetic flowmeter, conducting liquid in pipeline is the conductor moving in magnetic field and distance between two electrodes is the length (L) of conductor.
Technical Parameter for JC091 Insertion Battery Electromagnetic Flowmeter
|
JC091 Power ：24 VDC or 220 VAC
|
 |
 |
| Compact type | Remote control type | |
|
JC091 Power ：Battery type |
 |
 |
| With built in pressure sensor | IP 68 | |
| Точность | ±0.5%~±1.5% (under reference conditions) | |
| Caliber (mm) | DN100~DN3000 | DN100~DN3000 |
| Фланец | Conforming to GB9119, stainless steel | |
| Pressure rating | 1,6 МПа | |
| Material of converter housing | Die-cast aluminum alloy | |
| Material of sensor housing | Нержавеющая сталь | |
| Material of sensor structure | Stainless steel/PVDF | |
| Вес | 6 kg | |
| Electrical conductivity | ≥5μs/cm (negotiate with us for ordering in case of less than 5μs/cm) | |
| Electrode | 316L, hastelloy, titanium, tantalum and platinum | |
| Protection grade | IP65 | IP65/IP67(IP68 is optional to sensor) |
| Средняя температура | -25℃~80℃ | -25℃~120℃ |
| Температура окружающей среды | -25℃~60℃ | |
| Effect of ambient temperature | <±0.1%/10℃ or <±0.25%/10℃ | |
| Repetitiveness | ≤±0.01% or ≤±0.25% | |
| Analog output error | ≤±0.02mA | |
| Flow rate within measuring range | ≤10m/s | |
| Available to be buried | — | ≤5m (only IP68) |
| Electrical connection | M20*1.5 seal, G1/2 and NPT1/2 | |
| Sensor cable | <30M (negotiate with us for ordering in case of over length) | |
Model Selection for JC091 Insertion Remote Electromagnetic Flowmeter
| Код | Номинальный диаметр
(мм) |
Диапазон расхода
(м3/ч) |
Код | Номинальный диаметр (мм) | Диапазон расхода
(м3/ч) |
|||||||
| JC091-100
JC091-125 JC091-150 JC091-200 JC091-250 JC091-300 JC091-350 JC091-400 JC091-450 JC091-500 JC091-600 JC091-700 JC091-800 JC091-900 JC091-1000 |
DN100
DN125 DN150 DN200 DN250 DN300 DN350 DN400 DN-450 DN-500 DN-600 DN-700 DN-800 DN-900 DN-1000 |
8.48~282.6
13.25~441.56 19.08~635.85 33.91~1130.40 52.99~1766.25 76.30~2543.40 103.86~3461.85 135.65~4521.60 171.00~5722.65 211.95~7065.00 305.21~10173.00 415.42~13847.40 542.59~18086.40 686.72~22890.60 847.80~28260.00 |
JC091-1200
JC091-1400 JC091-1600 JC091-1800 JC091-2000 JC091-2200 JC091-2400 JC091-2600 |
DN-1200
DN-1400 DN-1600 DN-1800 DN-2000 DN-2200 DN-2400 DN-2600 |
1220.83~40694.40
1661.69~55389.60 2170.37~72345.60 2746.87 ~91562.40 3391.20~113040.00 4103.35~136778.40 4883.33~162777.60 5731.13~191037.60 |
|||||||
| Код | Материал электрода | |||||||||||
| K1
K2 K3 K4 K5 K6 K7 |
SS 316L
Хастеллой B Хастеллой C Титан Тантал Платино-иридиевый сплав Карбид вольфрама в покраске из нержавеющей стали |
|||||||||||
| Код | Материал вкладыша | |||||||||||
| C1 | PVDF
|
|||||||||||
| Код | Функция | |||||||||||
| E1
E2 E3 F1 F2
F3 F4 T1 T2 T3 P1 P2 P3 P4 P0 D1 D2 D3 J1 J2 J3 J4 |
Class 1.5%
Класс 1.0% Class 2.5% 4~20mADC, нагрузка ≤750Ω 0~3 кГц, активное напряжение 5 В, импульс с возможностью изменения, высоковольтный выход и выход эффективной частоты Интерфейс RS 485 (Modbus) HART Нормальная температура Высокая температура Ультратемпература 1,0 МПа 1,6 МПа 4,0 МПа 16 МПа Особое давление 220VAC+10%; 50Hz+ 1Hz 24VDC+10% Работает от батареек Интегральный тип Дистанционный тип Взрывозащищенный With built-in pressure sensor |
|||||||||||
How to order JC091 Insertion Remote Electromagnetic Flowmeter
- Средний
- Размер трубы
- Рабочее давление
- Рабочая температура
- Электропитание
- Другое требование
Video -JC091 Insertion Battery Electromagnetic Flowmeter
English 
Arabic 
Russian 
French 
Spanish