JC200 Thermal Flow Switch /Sensor

JC200 Thermal Flow Switch is based on two temperature sensors that are positioned within the medium. The unheated sensor registers the liquid temperature.

مدة السعر: فوب/سيف/إكسو/إكسو/دباغ
الحزمة: حقيبة خشبية مصدرة أو حسب طلب العميل
وقت التسليم:: من 7 إلى 10 أيام عمل
وسائل النقل: عن طريق البحر، عن طريق الجو، عن طريق البريد السريع
ميناء الشحن: ميناء شنغهاي
أصل المكان: جيانغسو
الضمان: 12 شهرًا

JC200 Thermal Flow Switch, the other sensor is heated a few degrees above the medium, when the medium flows, the heat generated in the sensor is conducted away by the medium. The temperature of the sensor is measured and compared to the temperature of the medium. The state of flow can be derived by the temperature difference.

طلب الحصول على أحدث الأسعار لدينا

الميزات
المواصفات
الأسلاك
البُعد
التركيب
Ordering
Accessory

No moving parts – no maintenance is nee
One single model is good for multiple pipe size
تصميم مدمج
Low–pressure loss
LED displays flow trend and switching state

Measuring range:	1…150cm/s(Water), 3…300cm/s(Oil)
Measuring range:	20…2000cm/s(Air)
Output:	PNP, NPN, Relay, Analog (4…20mA)
Output:	PNP + NPN (SPDT)
Power supply:	24V±20%DC
Operating current::	Max. 400 mA(PNP / NPN)
Operating current::	Max. 1A@48V ac/dc(Relay)
No-load current:	Max. 80mA
Display:	6-LEDs
Calibrating:	مقياس الجهد
Pressure rating:	100bar
Temperature gradient:	≤4℃/s
Response time:	1–13s, Typically 2s
Initialization time:	8s
Wiring protection:	Reverse polarity, Overvoltage and Short-circuit
Protection class:	IP67
Medium temp.:	-20–80℃
Ambient temp.:	-20–80℃
Storage temp.:	-20–100℃
Electrical connection:	M12 plug
Materials:	Sensor: stainless steel
Materials:	Housing: stainless steel
Weight:	0.4kg

Wiring JC200 Flow Switch

Dimension JC200 Flow Switch

Mounting JC200 Flow Switch

FT11N	–	G12	H	D	P	P	Q	الوصف
JC200	–							Model# Electronic flow switch (sensor)
		G12						Thread G1/2
		G14						Thread G1/4
		N12						Thread NPT1/2
			H					Male thread
				D				DC 24V±20% power supply
					P			PNP output
					N			NPN output
					C			Relay output
					A			4…20mA output
						R		PNP + NPN output (SPDT)
						–		4…20mA output
							Q	M12 plug

ST04-	PU	02	F	G	الوصف
ET04-					M12 Cable outlet
ST04-					M12 self locking screw plug
	PU				Material: PUR
		02			Length: 2M
		05			Length: 5M
		10			Length: 10M
			F		Female plug
				G	Straight plug
				W	Right angle plug

Note: Model with relay output needs 5-pin plug – change S(E)T04 to S(E)T05 when ordering.

تنزيل الكتالوج الخاص بنا

احصل على أفضل عرض أسعارنا