JC080 Smart Steam Vortex Flowmeter
JC-080 smart steam vortex flowmeter is widely used for measuring the flow rate of pipeline fluid, include gas, liquid, and steam, etc. It has the advantage of little pressure loss, broad span range, and high accuracy. It doesn’t be affected by the influence of density, pressure, temperature, and viscosity when measuring flow rate. There are no movable mechanical parts inside the meter body. So, this flowmeter has high reliability and little maintenance.
- Working Principle
- Technical Parameter
- Application
- Dimension
| Standard | Q/320831AHH003-2004 JB/T6807-93,ISO,CE | ||
| Medium | Gas, liquid, steam | ||
| Caliber | Flange holding (clamp-on) type | 25, 32, 50, 80, 100, 150, 200, 250, 300 | |
| Flange connection type | 100, 150, 200, 250, 300 | ||
| Measuring Range | Normal range of flow speed | Reynold number 1.5 * 104 ~ 4 * 106; gas 5~50m/s;
liquid 0.5~7m/s |
|
| Normal range of flow rate | Liquid, gas flow range-sheet2;
steam flow range-sheet 3 |
||
| Accuracy | Class 1.5 | ||
| Temperature | Normal temperature -25℃~100℃
High temperature -25℃~150℃ -25℃~250℃ |
||
| Output Signal | Pulse voltage output signal | Square wave pulse | |
| Current remote signal | 4 ~ 20 mA, transmission distance 100m | ||
| Environmental Conditions | Temperature: -25℃~+55℃ humidity: 5~90% | ||
| Material | SS, Aluminum Alloy | ||
| Power | 24 V DC or lithium battery 3.6V | ||
| Ex | Exd II BT4 | ||
| Protection Class | IP65 | ||
| Requirements to front & back straight tube section | See Diagram 14 | ||
Wafer Connection 
Flange Connection
|
Wafer Type |
DN (mm) | Pressure
MPa |
L
mm |
G | D
mm |
dl
mm |
N-d2 |
d
mm |
b
mm |
Weight
Kg |
|
| Normal Temp. | High Temp. | ||||||||||
| 25 | 2.5~4.0 | 80 | 342 | 500 | 76 | – | – | 25 | – | 7 | |
| 32 | 2.5~4.0 | 80 | 342 | 505 | 76 | – | – | 32 | – | 10 | |
| 50 | 2.5~4.0 | 80 | 337 | 515 | 86 | – | – | 50 | – | 12.5 | |
| 65 | 1.6~2.5 | 80 | 345 | 530 | 102 | – | – | 65 | – | 28 | |
| 80 | 1.6~2.5 | 100 | 350 | 540 | 112 | – | – | 80 | – | 25 | |
| 100 | 1.6~2.5 | 110 | 330 | 550 | 132 | – | – | 100 | – | 35 | |
| 150 | 1.6 | 140 | 355 | 575 | 203 | – | – | 150 | – | 40 | |
| 200 | 1.6 | 150 | 380 | 600 | 259 | – | – | 200 | – | 46 | |
| Flange Connection
Type |
25 | 2.5~4.0 | 180 | 342 | 500 | 25 | 10 | ||||
| 32 | 2.5~4.0 | 180 | 342 | 505 | 32 | 12 | |||||
| 40 | 2.5~4.0 | 180 | 337 | 515 | 40 | 14 | |||||
| 50 | 2.5~4.0 | 180 | 345 | 530 | 50 | 15 | |||||
| 65 | 1.6~2.5 | 200 | 350 | 540 | 65 | 20 | |||||
| 80 | 1.6~2.5 | 200 | 330 | 550 | 80 | 25 | |||||
| 100 | 1.6~2.5 | 220 | 355 | 575 | 125 | 180 | 8-Ø18 | 100 | 26 | 30 | |
| 125 | 1.6~2.5 | 220 | 380 | 600 | 32 | ||||||
| 150 | 1.6 | 240 | 342 | 500 | 280 | 240 | 8-Ø23 | 150 | 28 | 34 | |
| 200 | 1.6 | 240 | 342 | 505 | 335 | 295 | 12-Ø23 | 200 | 30 | 41 | |
